Protein Standards
SEPAX Protein Standards support protein system suitability and calibration for protein-focused chromatographic methods. Use the searchable catalog table below to compare the listed phases, particle sizes, pore sizes, dimensions and catalog numbers, then confirm the final configuration against the intended method and instrument requirements.
Protein Standards specifications
| Product phase | Particle size (µm) | Dimensions | Catalog number |
|---|---|---|---|
| Sepax Protein Standard | 201002-BRU | ||
| Sepax Protein Standard | 201002-0000 | ||
| Sepax Protein Standard | 201002-TU | ||
| Sepax Protein Standard | 201004-0000 | ||
| Sepax Protein Standard | 201007-0000 | ||
| Sepax Protein Standard | 201005-0000 | ||
| Sepax Protein Standard | 201006-0000 |
Overview
Named phases: Sepax Protein Standard
Separation categories: Sepax Protein Standard
Available particle sizes: See product table µm
Scientific principle
Selection should follow the separation mode and exact catalog configuration.
For detailed surface chemistry and packing guidance, contact technical support.
What are SEPAX Protein Standards?
SEPAX Protein Standards are catalog-listed products for protein system suitability and calibration. The family is intended for protein-focused chromatographic methods, with available configurations shown in the specification table on this page.
How do Protein Standards work?
The separation is governed by comparison with a defined reference material under the selected method conditions. Selectivity also depends on the exact phase, mobile phase, sample properties, temperature, flow rate and column dimensions.
How to select a configuration
Start with the required separation mechanism and named phase. Then compare particle size, pore size where listed, internal diameter, length and catalog number. Match the configuration to system pressure capability, sample load and the scale of the method.
Applications
This family is relevant to system suitability, calibration and performance monitoring. Suitability must be confirmed experimentally with the actual sample and method conditions.
Method development
Begin with a documented method or a chemically reasonable starting condition for the selected phase. Control sample solvent strength, buffer compatibility, pH, ionic strength, gradient profile, temperature and injection volume. Change one variable at a time and record system-suitability results.
Column care and storage
Filter samples and mobile phases, prevent buffer precipitation, avoid sudden solvent incompatibility and stay within the product-specific operating limits supplied with the column. After use, remove strongly retained material with a compatible wash and store the column only in a suitable solvent for that exact phase.
Replacement and method transfer
Do not select a replacement by dimensions alone. Compare separation mechanism, stationary-phase type, particle size, pore size where applicable, column geometry and method conditions. Verify equivalence through retention, resolution, efficiency, tailing and system-suitability testing.
For catalog identification and application support, contact SEPAX technical support in India.
Troubleshooting guidance
Unexpected standard profiles may indicate degradation, aggregation, adsorption, excessive injection volume or a system/column performance issue.
Cleaning and regeneration
Store standards according to their individual handling requirements and prepare fresh working solutions when stability is limited. Keep solutions free from particulates and aggregates.
Mobile phase recommendations
Prepare standards in a buffer compatible with the SEC method and avoid repeated freeze–thaw cycles. Use concentrations that produce reliable detector response without overloading.
Related SEPAX product families
For complementary selectivity or workflow steps, also review SEC Columns, Proteomix Columns and Antibodix Columns. These related families can support orthogonal method development, sample cleanup, confirmation or scale-up depending on the application.
Frequently asked questions
What are Protein Standards?
Protein Standards are SEPAX catalog products used for protein system suitability and calibration. The listed configurations can be compared by phase, particle size, pore size where applicable, dimensions and catalog number.
How do Protein Standards work?
They separate analytes through comparison with a defined reference material under the selected method conditions. The exact behavior depends on the selected phase and method conditions.
Which Protein Standards should I choose?
Choose first by separation mechanism and named phase, then by particle size, pore size where listed, internal diameter, length, sample load and system pressure capability.
Does this page show the catalog configurations for Protein Standards?
Yes. The searchable specification table presents the configurations included in the website catalog data for this family. Use the catalog number when requesting confirmation or a quotation.
What applications are suitable for Protein Standards?
This family is relevant to system suitability, calibration and performance monitoring. Final suitability depends on the analyte, sample matrix and method requirements.
Who supplies Protein Standards in India?
Akira Analytical Solutions Pvt. Ltd. supplies SEPAX products in India and assists with catalog identification, column selection and technical enquiries.
Technical support for Protein Standards
Send the application, current method and preferred dimensions to Akira Analytical Solutions Pvt. Ltd..